Strike Shadow Parts
Strike Products
Fully bolt-on front & rear 14" Sumo wheel set for Yozma 10 Pro and Throne Strike Shadow (60V & 72V) Ideal replacement for bikes with a 14/17 wheel set up.
Fits Yozma 10 Pro, Throne Strike Shadow models (60V and 72V) and Altis Delta (other similar bikes)
Uses your bike’s stock spacers and sprocket — no hub machining required
Includes rotors with each rim
Kenda Tires included & Installed 90/90/14
Bolt-on installation — professional or experienced DIY recommended
Please ensure correct installation; we are not responsible for issues caused by improper installation
In stock — ships next business day normally; delivery to your door in 3–7 business days
EMF Pit bike wheel sprockets fit!
If you’d like installation guidance or need compatible sprocket/adapter options, we’re happy to help — we also have step-by-step videos to walk you through the swap.
EMF Sur‑Ron Style Throttle — Popular, Plug & Play, Tested
Our EMF Sur‑Ron style throttle is a community favorite for throttle upgrades and replacements. It’s built to be reliable, responsive, and easy to install — perfect for riders running Yozma, Strike Shadow, E‑Box, and other razor-style electric bikes. We offer multiple plug & play options to match popular controllers such as Fardriver and Vevor as well.
Key points
Multiple plug & play harness options available for common bikes and controllers.
Each throttle is bench‑tested for function and consistency before it’s boxed — we don’t ship untested parts.
One of the most trusted throttle dealers in the community because of our testing and quality control.
Popular choice for upgrades or direct replacements.
Ships next day with FREE shipping.
Compatibility & important note
Make sure your controller’s harness is not modified from the original connector clip. This throttle requires the stock harness wiring and will not work with a modified harness.
This product will not work on a stock Tuttio Fardriver harness.
What’s in the box
EMF Sur‑Ron style throttle (preassembled)
Matching plug & play harness (selected option)
Basic installation pads and instructions
Quality-checked, bench-tested unit
Choose Whatever Colors You Like!
If You Need Help Be Sure To Check Out Our Methods To Install Grips On Our YouTube Video!
For Domino, Surron and Talaria Throttle
If Bought Alone It Will Be An Extra $5 Shipping
Choose Whatever Colors You Want!
If You Need Help, Be Sure To Check Out Our Methods To Install Grips On Our YouTube Video.
There Is A Left And Right In Each Set. One Will Feel Squishier And Noticeably Thinner Than The Other, That Will Go On The Throttle Side
For Domino, Surron, And Talaria Throttle
If Bought Alone, It Will Be An Extra $5 Shipping
Grey option has changed to black tips and gray middle
Get your wheelies on lock with Shift Lock for Yozma and Strike Shadow style bikes— a simple bolt-on that puts control back where it belongs: your foot.
Three knob positions let you lock your foot exactly where you want it for comfortable, repeatable wheelies.
Bolt-on, plug-and-play design installs in minutes with basic tools — no cutting or permanent mods.
Firm, secure hold keeps your toes engaged so you can sit farther back and stay locked in during long wheelies.
Durable materials built for daily abuse on razors and modified electric bikes — reliable performance without breaking the bank.
Low-profile, rider-friendly shape that won’t snag or interfere with normal riding when not in use.
Why you’ll love it:
Makes holding wheelies easier and less tiring
Adjustable placement to match your riding style
Affordable, bolt-on solution that’s safe and reversible
Universal for Right or Left side
Ships next day
Includes: Shift Lock assembly, mounting hardware, and quick install instructions. Ready to bolt on and ride — lock your foot, lock the wheelie.
Connect to your Fardriver controller with an Android or Apple device via Bluetooth.
Important safety note: changing settings can damage your controller or other components if not done correctly. We are not responsible for your tune — every bike and build is different. Proceed only if you understand the risks and know what each setting does.
Quick connection steps
Power on your Fardriver controller and the bike.
Enable Bluetooth on your Android or Apple device.
Open the Fardriver app (or compatible tuning app) on your device.
In the app, scan for nearby devices and select your Fardriver controller from the list.
If prompted, enter the pairing code shown by the app or controller documentation.
Once paired, confirm the app shows live data (battery voltage, motor current, speed, etc.) before making changes.
Before you change anything
Take photos or notes of default values.
Make one change at a time and test ride gently after each change.
If you’re unsure, consult a professional or reach out to experienced members of the community or YouTube
Common settings to be cautious with
Max current/phase current: Increasing can boost power but risks overheating motor, MOSFETs, and batteries.
Battery cutoffs and voltages: Incorrect values can over-discharge or over-charge battery packs.
Throttle response and ramp rates: Too aggressive settings can cause loss of control.
Regen/braking strength: Excessive regen can overheat controller or cause unstable braking.
Motor timing/commutation: Wrong timing can cause overheating, noise, or motor damage.
If something goes wrong
Revert to backed-up/default settings immediately.
Power down and inspect wiring, connectors, and components.
We sell plug-and-play parts and provide help videos to keep your build safe and reliable but are NOT responsible for your tune.
Free Shipping - Ships Next Day
Universal Vented Number Plate — Wire Mesh with Titanium Bolts
Universal fit — mounts to moto style fork tubes
Vented design with built-in wire mesh for airflow and protection
Wire mesh secured with titanium bolts for a clean, corrosion-resistant finish
Includes 4 heavy-duty zip ties for quick, secure installation to the fork
Lightweight, durable construction
Clean, finished look that complements custom builds
What’s in the box:
1 vented number plate with wire mesh attached
Titanium bolts securing the mesh (installed)
4 zip ties for mounting to the fork
Notes:
Bolt-on mesh is pre-installed; no drilling required
Universal sizing
Designed for cosmetic and light debris protection; not intended as a full-impact guard
Plug-and-Play Headlight & Taillight Kit for the Strike Shadow
Make lighting simple and reliable — this plug-and-play kit installs between your key plug and controller for a true no-fuss upgrade. Quick install with zero cutting or splicing.
What’s included
Baja Headlight (choose White or Yellow Baja)
Taillight
Wire harness
Headlight switch
Key features
True plug-and-play: plugs between the key plug and controller for an easy, reversible install
Key-operated: lights turn on and off with your key ignition
Complete kit: everything needed—headlight, taillight, harness, and switch
Why you’ll like it
Safe and reliable: designed to work with your Strike Shadow’s wiring without modification
Fast install: get back on the road quickly with a clean, OEM-style connection
3-D custom tail light bracket included for easy installation
Affordable quality: built for everyday use while keeping costs low
Perfect for riders who want a straightforward, reliable lighting upgrade for their Strike Shadow 48v, 60v, and 72v.
Replaces your stock Display with a new harness compatible with Chaojie displays like the 3.13 & Gen 3 touchscreen (DISPLAY NOT INCLUDED SSOLD SEPERETLY).
Plug-and-play installation — but you must use the Fardriver Bluetooth dongle (sold separately) and follow our setup video to change settings in the app; without the dongle and app setup, the display and bike will not function.
Note: If you choose the Chaojie 3.13 display, not all functions will be available because the stock controller and battery don’t support them. You will, however, get live Watts, Speed, and Voltage readouts.
Included in this set: new Fardriver harness, EMF Mode Switch, and display harness set for Chaojie Displays (Sold Separately)
Connects to your stock key, throttle, and motor Hall sensor exactly like the original harness.
Spinner for bike with EMF chrome logo. Adhesive tape installed — just peel and stick! For best results, clean the surface thoroughly and apply in warm conditions. Durable chrome finish resists weather and looks sharp on handlebars, hubs, or body panels. Easy bolt-on styling without tools or mods; perfect for personalizing your bikes with a sleek Electric Moto Family touch.
-Free Shipping
-Ships Next Day
This aluminum sprocket fits pit bike wheels commonly used on Razor, Tuttio, Yozma, Hey Bike, ETM5, Strike Shadow, and other similar electric bike builds. Precision-cut for reliable engagement and long life, it’s a direct bolt-on upgrade that works with standard chains and bolt patterns found on most razor-style drivetrains.
Key features:
This sprocket is for pit bike wheels commonly used on Razor, Tuttio Yozma, Hey Bike, ETM5, Strike Shadow, and other similar builds! Does Not Fit Stock Wheels see our other options for razor wheels!
Available in multiple colors to match your custom build
Durable finish resists corrosion and road wear
Simple bolt-on installation — no fabrication required (Bolts not Included)
Perfect for riders who want a reliable, attractive drivetrain component that keeps their electric bike running clean and looking sharp. Please check out the videos below that help explain chain sizes and gear ratios!
Build your own 12 volt Set