EMF 12 Volt Light & Accessory Kit’s
EMF 12 Volt Light & Accessory Kit’s
Please Watch Our Full Video Below
Limited Stock
If you're looking at accessories for your electric vehicle, you'll need a 12 Volt power supply to plug everything in. The 36v-90v converter features O-rings for both Positive and Negative connections to integrate with your controller and battery setup, drawing power from your main battery.
For those using Milwaukee M12 batteries and wanting to keep your power supply separate from the main battery, the M12 Adapter is a suitable choice. Please note that batteries are not included with these accessories. BATTERY NOT INCLUDED
When purchasing, please note that the on/off switch is sold separately. If you do not select the appropriate switch at the time of your order, the kit will not operate upon arrival. Ensure you have everything necessary for a smooth setup and immediate enjoyment of your Set.
-No Batteries, Lights, Switches Or Accessories Included In This Set!
You also NEED to pick out your main power switch to power on and off the system it will be separate from your main power of the machine your attaching it to. Please Pick out separately shown below to add on as an option.
Works easy on Tuttio, E-Box, Fardriver, Some Moto Tech, Little Bit, Kelly, and more
Comes With Adapter 6 Plug Harness EMF accessories (Accessories Sold Separately)
15 AMP Fuse For Extra Protection
15 Amp Converter Is Larger Then The 10 Amp Option. (We May Add A 8 Output Accessories Harness Later For Mor Accessories Recommending 15 Amp)
Must Choose EMF 12 Volt ON/OFF Switch Separately
Choose Any EMF Accessory To Plug Into Your Power Source
Choose 36V-90V Convertor Or 12v M12 Adapter For Main Power
Easy Plug N’ Play System 3ed Generation
Beta Tested By Riders
Includes 6-Way EMF Harness, Power Source, and Fuse
All Accessories Run On 12 Volt So You Will Need To Pick A Power Source. Choose Between the 36 volt-90 volt convertor or a Milwaukee M12 Adaptor Plug As Your “Power Source”.
First Pick Your Power Option
Basic AA 12V Power Box — Power ONE EMF Accessory Anywhere
Give your Bike a simple, portable 12V power source with our Basic AA Power Box. Designed to run a single EMF 12V accessory using eight AA batteries (batteries sold separately), this compact unit is perfect for testing, temporary installs, or If you only want 1 accessory to keep it simple! You can change out for a different EMF Power Supply down the road and your accessory will plug right in with 5 more.
Features
Powers one 12V EMF accessory (limited by AA battery amperage)
Requires 8 × AA batteries (not included)
Two output ports:
White = accessory output
Black = accessory On/Off switch input (for use with our EMF On/Off Switch, sold separately)
Built-in On/Off switch on the box — use it if you don’t have the external switch installed (leave jumper plug in place)
Includes: 12V Power Box, Velcro mount strip, On/Off switch jumper
Compatible Accessories (sold separately)
Head Light options
Tail Light
Horn
Under Glow
Rock Light
And other 12V EMF accessories
Notes & Recommendations
This unit supplies limited current from AA cells — it’s intended for one low-draw accessory. High-draw items will rapidly drain batteries or may not last long.
For multi-accessory setups or higher current needs, choose a higher-capacity power solution from our lineup.
Velcro strip included for easy, secure mounting and removal to replace batteries
Simple, safe, and affordable—our Basic AA Power Box is a convenient way to add a single 12V accessory to your gas or electric bike without permanent wiring.
Next Pick Your Main
ON/OFF Power Switch
Customize Your Ride with Choice of ON/OFF Switches
Elevate your bike’s functionality and style with a selection of ON/OFF switches available in various colors and styles. Designed for both main power and accessory ON/OFF harness, these switches allow you to personalize your setup to fit your preferences.
Style Options
Cut In Styles: These switches blend seamlessly with your bike’s design while providing easy accessibility.
On Bars Style: If you prefer a more prominent and easily reachable option, the on bars style provides an ideal solution.
Universal Compatibility
All switches are universal and compatible with the EMF 12v System, making them a functional addition to any bike. You have the flexibility to choose an ON/OFF switch that meets your needs, ensuring that power management is straightforward. Only For 12v System
USB Charger Functionality
For those who utilize USB chargers, our dedicated USB Charger ON/OFF switch can effectively control the power to the USB hub. When activated, this switch powers on the USB charger along with any connected accessories, simplifying your power management.
Choose the style and functionality that best suits your riding experience!
Choose From Different Colors And Style ON/OFF Switches For Your Bike! These Are Needed For Main Power And Accessory ON/OFF Harness. Choose Cut In Styles Or On Bars Style For Your Preference! The USB Charger ON/OFF Switch Will Turn USB On Along With The Accessories It Is Connected To. Only For The 12v System.
Only For EMF 12 Volt NOT Main Bike Power
Color Options- Red, Blue, Green, And White
19mm “Power” Cut In LED Options $15
On Bars LED Options -DISCONTINUED-
On Bars No LED Options $9
Moto Party On Bars $15
USB On Bars Switch $16
If you're interested in purple, orange or EMF custom cut in switch please contact us
You Have To Pick A Main Power Switch Separately To Plug Into Your Power Source. We Offer a Large Variety Of ON/OFF Switches For You To Choose From.
We Recomend What We Call The “Safety Set” Getting The Head Light, Tail Light, & Horn With Power Supply & Switch.
Last Pick Your Accessories
If you need a headlight to extend your riding time safely, this is the affordable plug-and-play ultimate option! Choose your favorite style or bare wire to connect your own light to our EMF system. Each accessories harness comes with a jumper plug so the light will be always on when your EMF 12V main power switch is activated.
As you add more accessories and desire a separate switch, simply select an EMF switch, unplug the jumper cable clip, and plug it in for easy, plug-and-play functionality. Your ride can adapt as your needs evolve!
-Must Have EMF 12v Power Supply To Plug Into! Please See Our YouTube Video!
We Recommend The High Beam For Most Applications
Plug & Play With EMF 12v Power Supply
Designed For Razor’s, Bomb Moto’s, RTRs, MotoTechs, and More Bikes
For Safe Night Rides
Tested By Our Betta Testers Across The States First
Includes 1 light of your choice with basic hardware and 1 accessory harness to plug into EMF power harness. Comes with a plug for NO SWITCH but can be removed and can add ON/OFF switch from EMF Otherwise it will turn on and off with the main power switch.
Have you been wanting a tail light so that others can see you from behind? Look no further! We offer a reliable fit for a Razor tail light with two basic options available for now, with more exciting choices on the way.
Additionally, we have wired the harness for blinkers, which are currently unavailable, but stay tuned! If your bike has brakes equipped with a brake switch plug, this set is ready for our brake light adapter (sold separately) for a fully functional brake light. Upgrade your ride with our tail lights and enhance your visibility on the road! If you don't have compatible brakes yet leave them plugged in for a brighter running tail light!
Tail Light With Blinkers Option Will Need The EMF 12v Blinker Switch And Flasher Set (Sold Separately Below)
RSF Surron Seat Mount Ask For The EMF Blinker Tail Light Bracket For Set Up shown Below. Link:
https://www.etsy.com/listing/1488092187/rsf650-seat-mount-for-suron-seat-v1
-Must Have EMF 12v Power Supply To Plug Into! Please See Our YouTube Video!
Plug & Play With EMF 12v Power Supply
Designed For Razor’s, Bomb Moto, Tuttio, and More E-Moto Bikes
MX/SX Gen 1 Clip On Sale Gen 2 EMF Tail Light Will Be Able To Add EMF Blinkers! (Blinker Sets Sold Separately)
For Safe Night Rides
Wired For Blinkers From EMF (Sold Separately)
Tested By Our Betta Testers Across The States First
Includes EMF Tail Light Harness, and Tail Light Your Choice (If You Have a Harness and Only Need a light Contact Us
Needing an easy horn on your bike? Look no further! We offer a basic horn set designed for the EMF 12v system, ensuring you stay safe on the road.
If you've installed the EMF 12v High & Low Head Light set or a 3-Speed, consider our Combo Horn Switch option to optimize your handlebar space. Plus, the Talaria throttle extension harness lets you plug the momentary button directly into the horn harness to convert it into a horn button!
Both the Combo Horn Switch and Talaria throttle extension harness (sold separately) are providing you the flexibility to customize your setup. Stay safe and ride smart with our easy-to-install horn options!
-Must Have EMF 12v Power Supply To Plug Into! Please See Our YouTube Video!
Plug & Play With EMF 12v Power Supply
Designed For Razor’s & Bomb Moto Bikes
For Safety When Riding
Tested By Our Betta Testers Across The States First
Includes Horn, and EMF Harness. SWITCH SOLD SEPERATLY!!
Have you been wanting a way to keep a close eye on the heat of something on your bike?! We use this temp gage to connect to the EMF 12v system and tape the censor where ever we want to se the temp!
PLEASE READ- This is a sensor on a wire you can mount where ever you want on the bike to monitor heat!
-Must Have EMF 12v Power Supply To Plug Into! Please See Our YouTube Video!
Plug & Play With EMF 12v Power Supply
Designed For Razor’s & Bomb Moto Bikes
Help Keep An Eye On Temps
Tested By Our Betta Testers Across The States First
Includes Temp Gage
This is a different option then our normal 6 strip option. This has 2 long strips of under glow that has more customizable rolling color effect! Please Watch The Video Below to see. We think this has been a grate option for the Razor RSF650 Models or Mid West Mini Mod Swing arm because of the longer swing arm
This uses the same more advanced app that our EMF Circle Running L:ight Uses and can match!
Connects to Apple Or Android Devices
QR Scan Code For App In Package
RGB Color Chasing All Color Options
Can Cut To Size (We Recommend Filling The Cut End With Hot Glue)
Includes The Two 23 Inch Strips
Light up your night like never before with our innovative RGB Multicolor under glow lights! Designed for ease of use, these lights seamlessly connect to an app, giving you control at your fingertips. Plus, with the included remote (Remote May Very), you can change colors on the go—perfect for showcasing your style wherever you ride. Elevate your electric razor bike experience and let your personality shine brightly, all while enjoying the reliability and quality that Electric Moto Family is known for! Brighten your adventure Today!
Introducing the Plug and Play upgrade for the EMF 12V System! This innovative accessory harness features a convenient jumper plug that ensures your Underglow lights turn on automatically when the 12V system is activated. You can always toggle on and off with the BT App as well.
For added control, you have the option to utilize a separate EMF on/off switch. To do this, simply unplug the jumper clip and connect your EMF switch instead. This allows you to easily toggle the Underglow lights on and off while the 12V system remains powered.
Experience the ultimate in customization and functionality with our latest plug-and-play solution, designed for electric razor bikes. Stay safe, reliable, and stylish with Electric Moto Family!
-Must Have EMF 12v Power Supply To Plug Into! Please See Our YouTube Video!
Plug & Play With EMF 12v Power Supply
Designed For Razor’s & Bomb Moto Bikes
For Fun Night Rides
Tested By Our Betta Testers Across The States First
Includes 6 Led Strips, Remote, ON/OFF Switch harness. (Remote may be different than picture)
Choose EMF ON/OFF Switch If You Want To Have a Separate Switch (Comes with Jumper Clip In If NO Switch Is Picked)
This innovative plug N' play accessory is designed for our EMF 12 Volt System and connects seamlessly with the EMF 12v Power Harness (sold separately). Experience an array of stunning color-changing effects or opt for a classic white "headlight look."
Please refer to our installation video before proceeding, as this is a challenging installation to the number plate. Note that the NUMBER PLATE IS NOT INCLUDED! Please see the install videos provided below.
With Bluetooth connectivity, you can easily control the lighting via your Apple or Android devices, allowing you to change colors or turn the light on and off at your convenience. This light will always remain powered on with your EMF 12v system, ensuring you are more visible wherever you ride.
Now Available For Easy Install Already Attached To A Number Plate!
For No Number Plate Install Level 3 - Most Difficult If Bought Without Installed Already (See Video's Below)
4 3/4 Inch Size
Apple & Android App For Tons Of Color Options! QR Scan Code Included For App
Choose From The Rainbow Of Colors! ( Watch 1st Video Below End Of Video Demonstrates)
Always On With EMF 12v System as Running Light ( Not Bright Enough To Call a Headlight)
Includes Circle 12v Light With App Receiver Box and Sticky Strips
Upgrade your bike with a USB charger of your choice! Keep your devices charged on the go, whether you're riding through the neighborhood or hitting the trails. Our selection of compatible USB chargers allows you to stay connected, ensuring your phone, GPS, or any other electronic devices are powered up while you enjoy your ride.
Installation is different depending on model we do have an easy “On Handlebars” On/Off switch option also. Keep Space on your bars with these options! Don’t let a low battery limit your adventure—add a USB charger to your electric razor bike today and stay charged wherever the journey takes you!
Plug N’ Play To The EMF 12 Volt Power Supply (Sold Separately)
Corded Option Will Have The EMF Accessory Harness For An Optional EMF On/Off Switch Without It Will Always Be On With The 12v Main Power
Cut In Circle Option Your Choice Of Blue Or Red LED Color
Includes 1 USB Option
Finally light up your bike with the plug-and-play Rock Light for the EMF 12V System!
Includes one bright white rock light designed to mount under your Electric Bike.
Runs exclusively on 12 volts and plugs directly into the EMF 12V Power Supply—no cutting or soldering required.
Comes with our handy jumper so the light will operate with your main 12V feed; no extra switch needed.. Want independent control? Add the optional EMF 12V On/Off Switch to turn the rock light on and off separately from the main system.
Durable, low-profile design made for safe, reliable nighttime visibility and style.
Bolt-on installation and plug-and-play wiring keep upgrades simple and affordable.
What’s in the box:
(1) White rock light
(1) Accessory Harness-ready harness with jumper for EMF 12V system
(2) Bolt with nut to attach
Perfect for adding a clean, professional glow to your ride without complicated installs. Questions about fit or installation email us anytime!
This is our option for having high and low headlight option with the flick of a switch! We use a 3 speed switch for now the middle will be off even with the 12v main power on, the one side will be high and the other sider will be low. Check out the Horn/3-Speed combo switch shown below if you have the EMF horn as well! Not compatible with the Blinker combo switch.
-Must Have EMF 12v Power Supply To Plug Into! Please See Our YouTube Video!
Plug & Play With EMF 12v Power Supply
Designed For Razor’s & Bomb Moto Bikes
For Safe Night Rides
Tested By Our Betta Testers Across The States First
If You Want Just The Harness Please reach Out To Us
Includes 2 Lights of your choice, Harness, and 3-Speed Switch
Build Your Turn Signal Set
1st Choose Your Switch
To complete your setup, you need both the EMF 12 Volt Power Supply and the EMF Tail Light Harness. These components are essential for the entire system to function seamlessly adding blinkers to the system while using the same tail light harness.
In addition, please select your blinker option separately from the choices provided below. This will utilize one slot on your EMF power set harness, giving you the flexibility to add blinkers alongside your headlights and tail lights from EMF. Enjoy customizing your ride with our reliable parts! This will plug into the EMF 12v horn as well for working horn. (Horn, Light, Tail Light, Power Set, & Blinkers SOLD SEPARETLY!)
Add rear only, front only or both together all plug N' Play only from EMF! Choose from multiple EMF blinkers from single blinkers to tail light combo options below!
Watch Recommended Video Below!
Must Have EMF Tail Light Set And EMF 12v System to Work!
Combo Switch Blinkers Have To Be Manually Switched To Off Each Use
Gives You Hazards, Left & Right, Horn & On/Off Switch (Note On/Off Switch Can Work For Main Power Option Or Accessory Switch Light Head Light)
Can Be Intergraded With The DKD or Chaojie Screen For Fardriver For Working Indicators On Dash See Separate Video!
Includes Flasher Module and On Bars Combo Switch (No Blinkers Included)
Then Choose Your Flasher Lights
(For Rear You Must Have Purchased The Tail Light Harness Separate To Plug In) Sold Separately
Elevate your ride with our front turn signals, designed to give your bike that sleek motorcycle look while enhancing safety. To Insure no disappointment upon arrival make sure you purchase or have already purchased our EMF 12 Volt Power Supply and the EMF 12v Blinker Combo Switch with Flasher Box (sold separately). YOU NEED BOTH ITOMS FOR THIS TO OPPARATE
These Turn Singles are designed to work seamlessly with our EMF Tail Light Harness, allowing you to plug into our EMF 12v Tail Light Harness for rear blinker options and a tail light. Don't miss out on this opportunity to boost your bike’s style and visibility to others!
Must Choose Blinker Combo Switch Set Separate -This Requires 3 Other EMF 12v System Products To Work! EMF 12v Power Supply, EMF 12v Tail Light, & EMF Blinker Switch With Flasher Box! (All Sold Separately!)
Comes With Sticky On The Back To Help Stay In Place
Built In Zip-Tie To Lock On To Forks
Includes 2 Front Fork Blinkers
Transform your electric razor bike with our custom blinker set! These blinkers come alone as a set, designed for those who want to create a unique look by installing where you want! This Is ONLY FOR REAR On EMF Sets, Front Blinker Sold Separately Using Different Plugs.
Please note, the blinkers do not include a harness and require the EMF 12v Power Supply, EMF 12v Tail Light Set, and EMF 12v Blinker Combo Switch with Flasher Box to function at all. All these components are sold separately, so be sure to gather everything you need for a complete installation! Pleas See Our Video Below! Can Now Be Front & Rear!
Elevate your ride with innovative lighting solutions that enhance both safety and style on your electric bike.
-This Requires 3 Other EMF 12v System Products To Work! EMF 12v Power Supply, EMF 12v Tail Light, & EMF Blinker Switch With Flasher Box! For Front Blinkers Also Needed Front Blinker Harness (All Sold Separately!)
Choose Option Of Blinker
Please read Carefully To Insure You Have Everything Needed From Our Site For This Product
EMF Razor Tail Light Bracket Designed For Easy Install ( Sold Separately)
May Need To Drill For Custom Install For DIY Install
Includes 2 Blinkers For Front & Rear.
If you have been wanting your EMF brake light to work seamlessly with your brakes, this guide will help you achieve that. However, it is essential to note that this solution ONLY WORKS with brakes that are equipped with a switch and the correct plug on the brake lever.
To get started, ensure that your brake system has the necessary components:
Verify the Brake Switch: Check that your brake lever is fitted with a functional switch. This switch is crucial for activating the brake light when the brakes are engaged. It will be a type of plug on the brake leavers.
Check the Plug Compatibility: Make sure that the plug on your brake lever matches the specifications required for the EMF brake light. Incompatible plugs will prevent the brake light from functioning properly.
Installation: Carefully follow the installation instructions on the picture for connecting the EMF brake light to your brake switch. Make sure all connections are secure and properly insulated.
Testing: Once installed, test the brake light by engaging the brakes. The light should illuminate when the brakes are applied, indicating that the installation was successful.
By ensuring compatibility and following these steps, you can enjoy a fully functioning EMF brake light that activates with your brakes.
PLEASE INSURE YOU UNDERSTAND CORECT BEFOR ORDERING! Please Watch Video On YouTube Reach Out For Questions! If Your Brake Has No Switch Or Wire Coming Out It Wont Work!
-Must Have EMF 12v Power Supply To Plug Into! Please See Our YouTube Video!
Plug & Play With EMF 12v Tail Light set and B1 Brakes Or EMF Brakes (Sold Separately)
Choose What Model Adapter You Need For Your Bike
Designed For Electric Bikes With Brake Sensors Like Ride Or Die Brakes, Midwest Mini Mods Brakes, And Others
Only For EMF 12v Tail Light Harness
Tested By Our Betta Testers Across The States First
Includes Adapter Harness only
Other Harnesses Or Switches
This is Plug & Play to the EMF 12v High/Low Head Light Harness and EMF 12v Horn to save space for those that have both options and want to free up some space!
Short 16” Cord
-Must Have EMF 12v Power Supply To Plug Into! Please See Our YouTube Video!
Plug & Play With EMF 12v System for High/Low Headlight Option and 12v Horn ( Sold Separately)
Choose 3-Speed For Vevor/Fardriver Style Clip For 3-Speed Or EMF 12v High/Low Beam Head Light Option.
Tested By Our Betta Testers Across The States First
Our EMF Talaria Throttle Can also Work as a Horn Switch!
Fardriver Users Watch The Video below To Get Modes Correct
Includes Horn/3-Speed Combo Switch.
If you have an Electro & Co (E&C) 12 Volt Convertor and want to add an EMF 12 volt accessory this will make any of our 12v accessory options plug & Play to the E&C 12v con
Make your Electro & Co (E&C) 12V converter instantly compatible with any EMF 12V accessory — plug-and-play simplicity.
This adapter lets you connect EMF accessories (tail light, headlight, underglow, horn, USB ports, and more) directly to the E&C 12V converter with no splicing or complicated wiring. Just plug it in and power up your accessories.
Features:
True plug-and-play: Designed to mate E&C 12V converter output to our EMF accessory harness
Safe & reliable: Built to the same quality standards as our other parts for dependable operation
No cutting or rewiring: Keeps factory wiring intact for easy installation and reversal
Compact, durable connector housing for moist and rough-use environments
Works with all EMF 12V accessory options — lights, horn, USB chargers, etc.
What you get:
Pre-wired adapter harness ready to plug into the E&C 12V converter and EMF accessory harness
Clear wiring labels for quick identification
Installation guide and supporting video to walk you through the hookup
Perfect when you want to add lighting, charging, or safety accessories to your Razor without fuss. Plug it in, add the accessory, and hit the road with reliable 12V power from your E&C converter.
vertor! as easy as plug it in and add the EMF accessory options like our tail light, head light underglow, horn, usbs and more!
Comes with 2-2 pin female clips to pin your own accessories and use the EMF 12v Power Supply with the Main Harness. This allows for seamless integration of additional components to enhance your riding experience. This Requires a tool to install properly for a good connection.
EMF Clips & Harness Alone
Wire your own accessory to the EMF 12 Volt System! This will plug into the EMF Main Power Accessories harness.
This will give you the opportunity to Plug N’ Play into our EMF main power supply and connect your own 12v option!
Do not plug in without wiring accessory properly. This Could Result In Ruining Your Convertor.
Includes 1 whip ready to connect to EMF 12 Volt Power Supply Harness .
This is our accessory harness that comes with all our accessories that have a On/Off Switch option allowing the jumper to stay in and the accessory will turn on with the 12v main power switch, or you can unplug the jumper and choose an EMF 12v On/OFF switch to turn the accessories on or off separately when the main 12v power is on.
This will give you the opportunity to Plug N’ Play into our EMF main power supply and connect your own 12v option!
Do not plug in without wiring accessory properly. This Could Result In Ruining Your Convertor.
Includes 1 Accessories Harness and 1 whip ready to connect to DIY style
If you have the EMF long & Skinny tail light and want the new bracket here it is!
Only For MX500 MX650 & SX500 Razors
Only Fits EMF Long & Skinny Tail Light
We Recommend To Hot Glue To Secure
Gen 2 Clip Updated For
Includes 1 Clip
$5 Shipping If Bought Alone